Hello all, I need to perform measurements on a low-power, non licensed transmitters acoording to FCC part 15, subpart C. The fundamental frequency is below 500 Mhz (higher frequency to measure is < 2Ghz).
I usually use a test facility located in France to perform test according to subpart B. This test facility is listed to FCC and on the letter from FCC, only the subpart B is mentionned. Does anyone know if I can use this test facility to perform test against Subpart C ? Regarding FCC requirements, there is no need to have different test equipment to perform measure on this kind of product, (compare to ITE) and I cannot see what could be the problem to use this test facility (except paper problem !) Thanks a lot for your contributions, Pierre SELVA Laboratory responsible SMEE Actions Mesures EMC and safety laboratory ZI des Blanchisseries 38500 VOIRON - FRANCE Ph : 33 4 76 65 76 50 Fx : 33 4 76 66 18 30 e-mail : [email protected] --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
