Hi Jim,

Barth Electronics of Boulder City, NV (702-293-1576) has some of the
highest quality pads on the market with flat frequency response to 20
GHz and some with the ability to take hundreds or thousands of volt
pulses (he designs for a specific voltage coefficient of resistance by
making his own resistors). You can see one of his designs for a T-pad
attenuator in an article I posted on my website in October titled "The
Tapered Wall Cavity" at http://www.dsmith.org. Jon Barth's designs are
quite elegant and very precise.

Doug


"Knighten, Jim L" wrote:
> 
> Does anyone know where I can purchase 50 Ohm to 75 Ohm coaxial impedance
> matching pads, with low loss that are fixtured for SMA to SMA, or APC 3.5mm
> to APC 3.5mm connectors?
> 
> Jim
> ________________________________________________________
> Dr. Jim Knighten                e-mail: [email protected]
> <mailto:[email protected]>
> Senior Consulting Engineer
> NCR
> 17095 Via del Campo
> San Diego, CA 92127             http://www.ncr.com <http://www.ncr.com>
> Tel: 858-485-2537
> Fax: 858-485-3788
> 
> ***** Notice the Area Code change from 619 *****
> 
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes).  For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).

-- 
-----------------------------------------------------------
    ___          _           Doug Smith
     \          / )          P.O. Box 1457
      =========              Los Gatos, CA 95031-1457
   _ / \     / \ _           TEL/FAX: 408-356-4186/358-3799
 /  /\  \ ] /  /\  \         Mobile:  408-858-4528
|  q-----( )  |  o  |        Email:   [email protected]
 \ _ /    ]    \ _ /         Website: http://www.dsmith.org
-----------------------------------------------------------

---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to