Paul, I just checked my copy of UL 1950 and there is no requirement for the size of the text. I even checked the NAA Annex, the "normative" annex for Markings and Instructions.
Hope this helps. Kurt Andrews Compliance Engineer Tracewell Systems, Inc. 567 Enterprise Dr. Westerville, OH 43081 Ph. 614-846-6175 Fax 614-846-7791 Email: [email protected] -----Original Message----- From: Paul Smith [SMTP:[email protected]] Sent: Tuesday, December 14, 1999 9:45 AM To: [email protected] Subject: UL 1950 Labelling Is anybody aware of any requirements in UL1950 that limits the size of allowable text for the rating plate/rear panel I/O identifications? Obviously it must be legible! Trouble is, my copy of UL1950 seems to have pages missing (thanks to the BSI PLUS update system), so I can't find anything about it. Excite -- Control Yourself. This E-mail brought to you by Excite's free E-mail service. Get your own E-mail address at http://www.excite.co.uk --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
