I know it's impolite to answer a question with a question (let alone a host
of questions), but...  What is this for? Do you need gain (directivity)?  If
so, how much?  How much bandwidth?  A quarter wave stub gives you broadcast
coverage, with little gain and relatively sharply tuned.  A logperiodic can
give a lot more gain and a lot of bandwidth.  A horn gives sub-octave
bandwidth, but potentially more gain.  Does the 30 dB attenuation have to be
inherent in the coax, or can you use an external pad?  Answer these
questions, and I can tell you exactly what to get.

----------
>From: Muriel Bittencourt de Liz <[email protected]>
>To: Lista de EMC da IEEE <[email protected]>
>Subject: antenna and cable for 2.4GHz
>Date: Fri, Dec 3, 1999, 10:51 AM
>

>
> Group,
>
> I need an antenna with impedance of 50ohms, for operating frequency of
> 2.4GHz. I also need a coaxial cable with 30dB attenuation, for operating
> at the same frequency (2.4GHz).
>
> Thanks in advance!
>
> Muriel
> --
> 8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)8-)
> Muriel Bittencourt de Liz, M.Sc. - EMC Engineer
> GRUCAD - Group for Conception & Analysis of Electromagnetic Devices
> Santa Catarina Federal University - UFSC
> PO Box: 476   ZIP: 88040-900 - Florianópolis - SC - BRAZIL
> Phone: +55.48.331.9649 - Fax: +55.48.234.3790
> e-mail: [email protected]
> ICQ#: 9089332
>
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes).  For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).
>
> 

---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to