Dear Mr. Najafi In Germany 4B3T line coding is used whereas in most other countries 2B1Q is used. The network operators decide on the requirements for the network termination (please see ETSI doc ETR 80). Nevertheless the U interface is not a public ISDN interface in Europe. The basic rate interface is usualy the S/T reference point, for which we have European harmonised technical regulations, too (TBR 3).
Please don´t hesitate to contact us in case of further questions. Best regards Winfried Pohl CETECOM ICT Services GmbH Tel.: +49 681 598 8110 Fax: +49 681 598 8775 email [email protected] http://www.cetecom.de > -----Original Message----- > From: Nezam Najafi [SMTP:[email protected]] > Sent: Friday, November 12, 1999 3:23 PM > To: [email protected] > Subject: 2B1Q Vs 4B3T Layer one line coding > > > To All: > > I have ISDB with Basic Rate Interface Line codig (2B1Q) for USA use. How > this will be compatible with European line coding standard > (4B3T). My interface is U interface. > > > Regards > Nezam Najafi > Compliance Engineer > Madge Networks, Inc > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
