Hello John,

You are correct, in that you don't need a TS001 report, but a CB Scheme
report to AS/NZS 3260 is not always acceptable either.

The ACA will normally only accept a report from a lab accredited by an
organisation that has a MOU with NATA. If your lab isn't recognised by the
ACA it will be a little more difficult to make use of your reports.

Regards
Barry Esmore

AUS-TICK
(The Australian Compliance Professionals)

Phone: + 61 3 9886 1345
Fax: + 61 3 9884 7272
Email: [email protected]
----- Original Message -----
From: Boucher, John <[email protected]>
To: <[email protected]>
Sent: Friday, October 08, 1999 7:54 AM
Subject: TS 001 reports for power supplies


>
> All:
>
> In pursuing Australian approvals for ITE, I am getting requests for TS 001
> reports
> for the system power supplies. These PSUs are embedded in the host ITE
system
> (i.e., they are a component of that system), and the PSUs have CB Scheme
reports
> that include the Australian variations. The systems have CB Scheme reports
that
> include the PSU reports. I agree that the end system should have a  TS 001
> report,
> and if circuit packs are approved individually, those that connect to a
telecom
> network
> should have TS 001 reports...but a power supply doesn't seem to fit the
scope of
> TS 001.
> I have in the past supplied TS 001 reports for PSUs, but it seems silly,
and I'd
> rather not
> do it unless it really is a requirement.
>
>
> John Boucher
> Lucent Technologies
>
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes).  For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).
>
>
>


---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to