If you went to the store to buy a TV and one of the sets came without a plug on
the end of the cord, what would your thoughts be?
You can get away without plugs in some markets, but most customers expect a
functioning product, not a do it yourself project.

"WOODS, RICHARD" wrote:

> I can find nothing in IEC 950 nor EN 60950 that defines the requirements for
> an attachment plug for equipment that is not permanently connected. Due to
> the silence of the standard, I conclude that an attachment plug is not
> required per the standard. Therefore, it appears that the plug wiring
> methods and strain relief must be per the national standards and/or
> electrical codes of each country. For example, UL 1950 has a national
> deviation that specifies the need for a plug.
>
> I conclude that it is acceptable to CE mark a product that has no plug and
> allow a certified plug to be attached in any of the EU member states. CE
> marking compliance will not be affected.
>
> I conclude that it is acceptable to replace a plug on a CE marked product
> with a nationally acceptable plug without affecting CE marking compliance.
>
> I understand that the power cord must be acceptable for use in the target
> country.  Therefore, it is not possible to ship a single attached power cord
> to Asia, Eastern Europe, Africa and South America since the power cord may
> not be legal in the target country even if a national plug is attached.
>
> Are my conclusions and understandings correct?
>
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes).  For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).


---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to