We use AS/NZS 4252.1:1994, which is a copy of EN 50082-1. Don't know whether there is any equivalent of EN50082-2.
Alexandru Guidea. >>> <[email protected]> 09/15/99 09:48am >>> Hello Charlie, I don't believe Australia has any immunity requirements at this time. They do require emissions testing and that these tests are performed by an accredited lab e.g.. A2LA or NVLAP. Any electronic or electrical product manufactured in Australia or imported into Australia for sale must comply with the relevant EMC standard for emission as detailed in the Australian "Electromagnetic Compatibility Framework, Information for Australian Suppliers". I know that for IT and telecommunications equipment this is AS/NZS 3548 OR EN 55022 OR CISPR 22. So I would suspect that it is EN55011 (CISPR 11) for ISM. To be sure, I would check with Kevin Richardson at: Stanimore Pty Limited (Australia) "Specialists in Technology Requirements and Compliance" Ph: 02-43-29-4070 Fax: 02-43-28-5639 Int'l: +61-2-43-2x-xxxx Email: [email protected] (Internet) or [email protected] (Internet) or 100356,374 (Compuserve) Good Luck, George Sparacino > -----Original Message----- > From: [email protected] [SMTP:[email protected]] > Sent: Tuesday, September 14, 1999 5:18 PM > To: [email protected] > Subject: Immunity Requirements for Australia > > > Hi everyone, > > Dose anyone know what the Immunity requirements for Australia are? We > > are using EN 61326, for ISM equipment, for Europe. We know about the > requirements for Emissions, AS /NZS 2064:1997 and that they are the > same as EN 55011. > > Thank you in advance > Charlie Martin > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
