Hello, This is what we use. We have a number of power supplies from 50 amps to 1000 amps. We use a calibrated current shunt to verify the output current.
Ned Devine Entela, Inc. Program Manager III Phone 616 248 9671 Fax 616 574 9752 e-mail [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Saturday, September 11, 1999 2:02 PM To: [email protected]; [email protected] Subject: Re: Ground Bond Testers Brian, I think that you would be able to use a bench type DC power supply which is cable of delivering 100A at low voltage of 12V. Standard does specify AC or DC current. This way, you don't have to have an specific ground tester. Almost all companies have DC power supply that can be used for these type of applications. Perhaps others could express their view on the use of DC power supply. Thanks Peter --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
