The flux used was
"Indalloy Flux # 2", made by
Indium Corporation of America
1676 Lincoln Ave
PO Box 269, Utica, NY, USA
13503
Phone: 315-853-4900
There may be better solder to use, but we just used 60/40 resin core solder.
The resin did not seem to create a problem with the Indalloy flux. The
fumes however are really nasty. We set up a box fan and stayed up wind of
the smoke. The breeze did not affect the heating capability of the 500 W
iron.
The manufacturer can probably provide further advice regarding compatibility
of materials.
Don Umbdenstock
Sensormatic
> ----------
> From: [email protected][SMTP:[email protected]]
> Sent: Monday, August 30, 1999 6:21 PM
> To: [email protected]
> Subject: Re: OATS Rework Results
>
> Don:
>
> I read your OATS Rework Info with great interest. I do not have anything
> further to contribute to your problem. One thing that I found very
> interesting was the soldering materials that your tech located for
> stainless
> steel. Could you possibly provide the manufacturer and pertinent info
> regarding this? This is the type of information I would like to file away
>
> for future use! Thanks --
>
> Val L. Erwin, NCE
> Consultant
> Summit Associates, Inc.
>
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
