Charles Any point that is accessible during either normal operation, or regular maintenance by an untrained person, is considered to be at risk due to an ESD event.(i.e. if the operator is required to change a ribbon then exposed areas should not be ESD sensitive, otherwise make it a service call).
Trained service personnel and specially trained operators are not considered to be an ESD hazard, as it is assumed that they use ESD prevention practices.. John Mowbray > -----Original Message----- > From: Grasso, Charles (Chaz) [SMTP:[email protected]] > Sent: Friday, August 13, 1999 12:35 PM > To: 'EMC Group' > Subject: Question on internal ESD testing > > > Hello, > > Does anyone in this august group apply ESD discharges INTERNAL > to a product as required by EN55024. > > I consider this just a tad egregious - don't you? > > Thank you > Charles Grasso > Advisory Engineer > StorageTek > 2270Sth 88th Street > Louisville CO 80027 M/S 4247. > Tel:303-673-2908 > Fax:303-661-7115 > email:[email protected] > Web Site: http://www.ewh.ieee.org/r5/denver/rockymountainemc/ > > > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
