John:
Refer to 21CFR 1040.10(g)(10) which covers label
specifications. You can access this section of the rules on
line at http:
//www.access.gpo.gov/nara/cfr/waisidx_99/21cfr1040_99.html
(10) Label specifications. Labels required by this section
and
Sec. 1040.11 shall be permanently affixed to, or inscribed
on, the laser
product, legible, and clearly visible during operation,
maintenance, or
service, as appropriate. If the size, configuration, design,
or function
of the laser product would preclude compliance with the
requirements for
any required label or would render the required wording of
such label
inappropriate or ineffective, the Director, Office of
Compliance (HFZ-
300), Center for Devices and Radiological Health, on the
Director's own
initiative or upon written application by the manufacturer,
may approve
alternate means of providing such label(s) or alternate
wording for such
label(s) as applicable.
Hope this helps.
Best regards,
Ken Shadoff
Senior Product Safety Engineer
Quality Management Dept.
Canon U.S.A., Inc.
Tel. (516) 328-5602
Fax. (516) 328-5169
From: "Kretsch John" <[email protected]> AT ~internet on
08/05/99 08:5c2 AM
To: "'EMC PSTC Group'" <[email protected]> AT
~internet@FCC
cc: (bcc: Kenneth A. Shadoff/NewYork/CanonUSA)
Subject: Laser Warning Label
Can anyone point me to a source regarding the clarity of the
laser warning label per CFR 1010?
I'm talking about things like size, fonts, etc.
We need to attach a pretty small label to the front of a
product.
Regards,
John R. Kretsch, P.E.
Manager, Design Assurance Engineering
ADC Broadband Communications
[email protected]
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
