Doug, I had a problem with a particular product that was failing hipot. Turns out the product drew 48-50 mA during test. My existing hipot failed the product at 40 mA and 1500 VAC. I had to get the hipot tester modified by the maker to allow the higher current. Unfortunately that cost me in output voltage, and the hipot can only do 1800 VAC now. I did find testers that would go 5 to 7 kV but they are current limited to 20-30 mA. Please let me know if you find what you are looking for.
Regards, Scott [email protected] -----Original Message----- From: [email protected] [SMTP:[email protected]] Sent: Monday, May 10, 1999 6:02 PM To: [email protected] Subject: Multi-function Compliance Tester Hello group, I am searching for a multi-function compliance tester that has as a minimum the following: 1) Hipot 0 to 10 kV AC/DC; 0 to 35 mA AC/DC (15 kV preferred) 2) Insulation Resistance 3) Ground bond 0 to 35 Amps (or more) 4) Ground Leakage The problem I have is the hipot, so far everywhere I search no one goes that high. Any help is appreciated. -doug ======================================= Douglas E. Powell, Compliance Engineer Advanced Energy Industries, Inc. Fort Collins, Colorado USA 970-407-6410 (phone) 970-407-5410 (fax) [email protected] www.advanced-energy.com ======================================= --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
