I apologize, these are questions I should have answered before they were asked. Our products are all tested and marked to EN 60950 / CSA 950 / UL 1950. All except one have IEC 320 inlets. We ship one of ten power cordsets with each product. The last product is hard-wired, that is, the installer connects to a terminal block in the base.
Scott [email protected] [email protected] writes: >Doug, > >What is your product? > >Is it plug & cord connected? (i.e. no reason for an municipal electrical >inspector to go poking about in the innards) > >Or is it hard-wired into a building's circuitry (i.e. electrical >inspectors >tend to look into at least the/a main power distribution assembly in the >equipment)? > >For what standards does it carry these UL, CSA and TUV marks? > >Regards, >Lauren Crane >Eaton Corporation. > > >> -----Original Message----- >> From: [email protected] [SMTP:[email protected]] >> Sent: Tuesday, April 20, 1999 11:10 AM >> To: [email protected] >> Subject: What Color is Neutral? >> >> Hi Ya'll, >> >> In following the thread about neutral color, I am reminded of a time 12 >> years ago when we had the same discussion here. The end result was my >> choice to use brown / blue / green/yellow as the primary wiring color >> scheme through all of our product lines regardless of where they ship. >> These colors are also forbidden for any other use in our products. We >have >> been shipping world wide with that scheme for these 12 years with no >> problems, and we have carried UL, CSA and TUV marks on these same >> products. >> >> Scott >> [email protected] >> >> --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
