TDK sent me several sheets of Ferrite material as samples. The material is very flexible and can be cut to any shape with scissors. I do not know if TDK provides this material in pre-cut sizes for IC Chips or have it available with PSA. I have not had an opportunity to try this material so I don't know how well it works.
Contact your nearest TDK representative and see what they say. Regards, Brian Kunde Group Leader Compliance Testing Center LECO Corporation 3000 Lakeview Ave. St. Joseph, MI 49085 (616) 982-5423 phone (616) 982-8964 fax [email protected] [email protected] ---------- From: <[email protected] > Sent: Tuesday, March 30, 1999 2:36 PM To: [email protected] Subject: Ferrite pads vendors Hello group, I am trying to find vendors who make ferrite pads that can be placed over the IC chips to absorb the EMI emissions within the board. Does anyone know any? I appreciate your help very much. Sarmad Albanna Compliance Engineer Hughes Network Systems -MD --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
