Peter,
I cannot tell you whether all UL/CSA Listed/Recognized/Certified circuit
breakers have a minimum 3 mm contact gap, but I always specify that this is
what I need when using breakers as a disconnect device.
Tania Grant, Lucent Technologies, Octel Messaging Division
[email protected]
----------
From: [email protected][SMTP:[email protected]]
Sent: Monday, March 22, 1999 12:15 PM
To: EMC-PST
Subject: 3mm contact gap for Circuit Breakers
Dear Members,
Can someone confirm that a UL/CSA Listed or
Recognized/Certified circuit breaker has minimum 3 mm contact
gap and can be considered suitable as a service disconnect device
in UL1950/CSA C22.2 950?
Regards,
PETER S. MERGUERIAN
MANAGING DIRECTOR
PRODUCT TESTING DIVISION
I.T.L. (PRODUCT TESTING) LTD.
HACHAROSHET 26, P.O.B. 211
OR YEHUDA 60251, ISRAEL
TEL: 972-3-5339022
FAX: 972-3-5339019
E-MAIL: [email protected]
Visit our Website: http://www.itl.co.il
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
