Gentlemen, There are a few leakage meters on the market and the safety standard will determine the model needed. To get the proper model one has to find out if leakage or touch current is needed and what frequency bandwidth is needed. A full capability meter will measure to IEC 990 and can be used for all other standards. A meter for IEC 60950 may not be adequate for IEC 61010, especially if the unit under test has a reasonably high frequency switch mode power supply. We relied on Ergonomics, Inc for guidance and delivery of the proper meter. Their phone is 215 357 5124 and the web site is www.ergonomicsusa.com.
Daniel Mis -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, March 15, 1999 7:37 AM To: [email protected]; [email protected] Cc: [email protected]; [email protected] Subject: Re: Leakage Current Measurements ED&D Inc. also offers several Leakage Current Meters specific to different Standards. They are located in Morrisville NC 919-469-9434 Ed --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
