The Work Equipment Directive 89/655/EEC (implemented in the UK by The
Provision and Use of Work Equipment Regulations 1998 (SI 1998:2306)
which is where the PUWER name comes from) does not mandate standards
directly. However, the WED requires that workplace equipment put into
service since the beginning of 1993 must comply with the requirements
of any of the CE mark directives which apply to that equipment, so in
practice the standards lists for each of the CE mark directives is
what you are looking for.
There are some notes on this on our web site at
http://www.conformance.co.uk/CE_MARKING/puwer.html
including a link to the full text of the UK regulations which you may
find helpful.
Hope that helps.
Regards
Nick.
At 10:17 -0500 14/12/2000, [email protected] wrote:
Where can I find (.pdf) OJ list of standards used to demonstrate
conformance to Provisions and Use of Work Equipment Regulations
89/655/EEC. I cannot fathom the
http://europa.eu.int/eur-lex/en/oj/index-list.html
site, as many times as I've tried getting info. Please help.
WmFlanigan
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
