We just finished harmonics testing today. The lab did not have us plug everything into one strip. We had two AC devices which make up the system. Both were tested separately, not together! Hope you can get this straighten out! Good luck!
-----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, November 27, 2000 12:19 PM To: [email protected] Subject: Testing as a system for harmonics? One of our products is sold as a system with several other non-connected products as well as a computer system and printer. We brought this product to a well known EMC Testing facility to perform Harmonics testing. They required that we plugged our product, as well as all of the peripheral devices, into a power strip and they then tested the complete system together for Harmonics. Obviously, it failed. Has anyone else had an EMC Lab make this request of testing the complete system? Is anyone aware of any document that requires system testing for Harmonics? All responses are appreciated. Regards Joe Martin EMC/Product Safety Engineer [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
