Hi Tommy, We use a Microtronix (www.microtronix.ca) model 500 test system, with an artificial head. If you prefer, you can use a more expensive B&K system.
regards Sérgio Rocha Loures Siemens Ltda. - Brazil ICN FL QEL Tel: +55 41 341-5755 Fax: +55 41 341-5058 E-mail: [email protected] >>> "Tommy" <[email protected]> 10/11/00 04:32 >>> Hi folk. As you konw,EN55024's dow is 2001.07.01. Many test item add than Generic Std. EN50082-1. So I prepare the test equipment and set-up. But I have no idea about acoustic measurement of TTE on EN55024 Annex A. Did you have configured test equipment of acoustic measutement? Which equipment is used or recommand? Model and manufacture. And Could you send acouse measurement test set-up daigram or photo? I should appreciate hearing from you. Best regards. Tommy ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
