Forwarded reply below.
---------- From: Pohl, Winfried [SMTP:[email protected]] <mailto:[SMTP:[email protected]]> Sent: Friday, November 03, 2000 5:00 AM To: [email protected] <mailto:[email protected]> Subject: AW: Compliance of a USB telephone Richard as this phone is not connected to the PSTN, you can forget about the R&TTE directive. This device can be treated like other USB devices. Best regards Winfried Pohl CETECOM ICT Services GmbH Tel.: +49 681 598 8110 Fax: +49 681 598 8775 email [email protected] <mailto:[email protected]> http://www.cetecom.de <http://www.cetecom.de> -----Ursprüngliche Nachricht----- Von: [email protected] <mailto:[email protected]> [mailto:[email protected]] <mailto:[mailto:[email protected]]> Gesendet am: Donnerstag, 2. November 2000 15:35 An: [email protected]; <mailto:[email protected];> [email protected] <mailto:[email protected]> Betreff: RE: Compliance of a USB telephone forwarding for : [email protected] <mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]> > . Can anyone help him? Richard Woods ---------- From: [email protected] <mailto:[email protected]> [SMTP:[email protected]] <mailto:[SMTP:[email protected]]> Sent: Thursday, November 02, 2000 12:05 PM To: Ilan Cohen; '[email protected]' Subject: Re:Compliance of a USB telephone forwarding for : [email protected] <mailto:[email protected]> ____________________Reply Separator____________________ Subject: Compliance of a USB telephone Author: Ilan Cohen <[email protected] <mailto:[email protected]> > Date: 11/2/00 12:48 PM Dear Group We are testing an PC telephone unit! It is a telephone terminal unit that connects to the USB port of the PC from which it receives power. There is no other connection, just the USB. Clearly this unit must comply with EMC requirements. Safety requirements are not mandatory but clearly they are recommended to be performed for UL1950 for the US and EN60950 for Europe. Two questions: 1) What about Part 68 in the US? Since unit is not directly connected to the PSTN officially it is exempt from the standard. (Acoustics tests are covered under UL1950) 2) What about RTTE directive in Europe? There is no standard you can test for. All of TBR 21 tests are not applicable. Thanks Ilan ---------------------------------------------------- Ilan Cohen Manager, Telecom Division I.T.L (PRODUCT TESTING) Ltd. 26 Hacharoshet St, POB 211, Or Yehuda, Israel. Tel 972-3-5339022, Fax 972-3-5339019 [email protected] <mailto:[email protected]> , website: http://www.itl.co.il <http://www.itl.co.il> ---------------------------------------------------- ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] <mailto:[email protected]> with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] <mailto:[email protected]> Michael Garretson: [email protected] <mailto:[email protected]> For policy questions, send mail to: Richard Nute: [email protected] <mailto:[email protected]> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
