I have also noticed that, and the version of EN 61032 that I am using is
dated 1998. I will have to check if there is a newer version or amendments.
I guess one way around it is to mark the terminal with "the symbol of 5.2b".
Ed
From: "James, Chris" <[email protected]>
Reply-To: "James, Chris" <[email protected]>
To: "EMC PSTC (E-mail)" <[email protected]>
Subject: EN 60065 1998
Date: Tue, 17 Oct 2000 13:58:05 +0100
EN 60065:1998 Clause 9.1.4 calls for the use of IEC 61032 test probe 16.
In EN 61032:1998 (IEC 61032:1997) test probe 16 has been deleted!!!
I assume the probe is the same shown as fig 6 in EN 60065:1994
........................ bit of an oxymoron calling these "standards"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
