There is no correlation between air filter flammability class and the UL94
classifications.

Regards,

Peter L. Tarver, PE
ptar...@nortelnetworks.com


-----Original Message-----
From: Jim Eichner [mailto:jim.eich...@xantrex.com]
Sent: Friday, October 06, 2000 10:17 PM
To: 'emc-p...@ieee.org'
Subject: RE: Have I baffled the Product Safety Technical Committee?????


Jeffrey:  I don't know the Class 2 designation as regards flammability, but
here are some old e-mails on the flame classifications, in case they help.

Regards,

Jim 

-----Original Message-----
From: Collins, Jeffrey [mailto:jcoll...@ciena.com]
Sent: Friday, October 06, 2000 1:20 PM
To: Collins, Jeffrey; 'emc-p...@ieee.org'
Subject: Have I baffled the Product Safety Technical Committee?????



        I know there's NEBS conferences on both coasts this week so many of
you may be out of the office.(I'm attending the one in Baltimore) 
        Does anyone have a good handle on all the different flame spec's and
if there's some correlation between them. See my first message below...

> -----Original Message-----
> From: Collins, Jeffrey 
> Sent: Tuesday, October 03, 2000 3:52 PM
> To:   emc-p...@ieee.org
> Subject:      UL Class 2 Flammability Ratings Correlation
> 
> Group,
> 
> Is anyone knowledgeable on how a UL Class 2 Flammability rating correlates
> with a UL 94-V? or HB rating?  I have seen the Class 2 flammability
> ratings on air filters. I have a Telecom product that is being designed
> not only for UL-1950 certification but will meet the Bellcore GR-63
> flammability spec's.  I am doing an analysis on fuel load and am curious
> what relationship, if any, there is between these ratings. While on this
> topic, has anyone had experience with correlating UL flammability ratings
> with NFPA flammability ratings?
> 
> All comments are welcome..........
> 
> 
> 
> Jeffrey Collins 
> MTS, Principal Compliance Engineer
> Ciena Core Switching Division
> jcoll...@ciena.com
> www.ciena.com
> 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Jim Bacher:              jim_bac...@mail.monarch.com
     Michael Garretson:        pstc_ad...@garretson.org

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org


Reply via email to