Hi Don,
As EN61000-4-x are basic standards and as their common title suggests, they really only specifiy "testing and measurement techniques". The product family immunity standard (e.g., EN55024 for ITE) is the standard whereby you have to meet the requirements. If no product family exists for your product(s), then the generic family immunity standard (EN50082-1 or EN50082-2 depending on intended operating environment) is applied. If you don't have the product or generic family immunity standard that pertains to your product(s), then IMHO, get it. I hope this helps. Best regards, Ron Pickard [email protected] Don_MacArthur@ selinc.com To: [email protected] Sent by: cc: owner-emc-pstc Subject: EN 61000-4-3 past 1 GHz @ieee.org 07/24/00 11:29 AM Please respond to Don_MacArthur I have heard that EN 61000-4-3 may be changed to require testing up to 2 GHz. I have heard that possibly the 1999 version states testing up to 2 GHz. Is this just a rumor? What is the likelihood that testing past 1 GHz will be required for this test? Don ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
