Ed,
UL in Melville, NY does the C95.1 and C95.3 testing, you will have to check
with David Burkhart directly for the RSS-102.
Please contact them directly for a price and delivery.
Stefan Hipskind, UL
Phone 1.847.272.8800, ext 42975
Fax 1.847.509.6311
"Working for a Safer World"
"Wismer, Sam"
<wismer_r@lxe To: Edward Fitzgerald
<[email protected]>, "EMC-PSTC
.com> (E-mail)" <[email protected]>
Sent by: cc:
owner-emc-pst Subject: RE: EMF Radiation : Test
labs
[email protected]
07/05/00
08:08 AM
Please
respond to
"Wismer, Sam"
Hi Ed,
I used ITS Menlo Park. Service was adequate, price was high, $16K for 3
radios,(due to the fact that only a handful of labs are equipped for this
testing) and competence was good.
I would likely use them again. I'm sure that as more labs get into this
type of testing the price will come down. Hope so anyway.
~~~~~~~~~~~~~~~~~~~~~
Sam Wismer
RF Approvals Engineer
LXE, Inc.
(770) 447-4224 Ext. 3654
Visit Our Website at:
http://www.lxe.com <http://www.lxe.com/>
-----Original Message-----
From: Edward Fitzgerald [mailto:[email protected]]
Sent: Tuesday, July 04, 2000 11:56 AM
To: EMC-PSTC (E-mail)
Subject: EMF Radiation : Test labs
Hi,
I am currently putting together a list of suitably accredited laboratories
that can test to RSS-102 and IEEE C95.1 & C95.3 for meeting compliance with
Industry Canada and FCC regulations.
Most importantly I am interested in those labs you have worked with and
could recommend; whether the recommendation be on price, service level or
just a high level of competence.
Many thanks,
Edward Fitzgerald
Director
Direct Tel. : +44 1202 20 09 22
Mobile Tel. : +44 7768 53 31 00
European Technology Services (EMEA)
Specialist Global Compliance and Regulatory Consultancy
Regional Offices in Australia, Canada and the UK.
GLOBAL INtelLIGENCE <http://www.ets-tele.com/tics> Site <
http://www.ets-tele.com/tics <http://www.ets-tele.com/tics> > pssst ...
spread the word
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
********* Internet E-mail Confidentiality Disclaimer **********
This e-mail message may contain privileged or confidential
information. If you are not the intended recipient, you may not
disclose, use, disseminate, distribute, copy or rely upon this
message or attachment in any way. If you received this e-mail
message in error, please delete the e-mail and any attachments
and notify Underwriters Laboratories Inc. at
[email protected].
UL does not accept liability for any errors, omissions, corruption
or virus in the contents of this message or any attachments that
arise as a result of e-mail transmission.
**************************************************************************
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
