As a newcomer in the world of EMC, I have found "EMI Troubleshooting Techniques" (ISBN 0-07-134418-7) by Michel Mardiguian to be very good. It is published by McGraw-Hill, and is available on their website at www.books.mcgraw-hill.com.
Regards, Fabian Spadaccini TA Instruments-Waters LLC (p) 302-427-4189 (f) 302-427-4081 [email protected] www.tainst.com -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, September 18, 2000 9:06 AM To: [email protected] Subject: RE: EMC/EMI Training These are great books for EMC design. Can the group recommend a similar list of books for troubleshooting EMC designs? Richard Woods ---------- From: Ron Pickard [SMTP:[email protected]] Sent: Friday, September 15, 2000 5:00 PM To: [email protected] Subject: Re: EMC/EMI Training Hello to all, IMO, three of the most informative books from a practical intro approach into the world of EMC are (not in any particular order): 1. Henry W. Ott, "Noise Reduction Techniques in Electronic Systems", John Wiley and Sons, ISBN 0-471-85068-3, 2. Mark Montrose, "EMC and the Printed Circuit Board - Design, Theory and Layout Made Simple", IEEE Press, ISBN 0-7803-4703-X, and 3. Michel Mardiguian, "Controlling Radiated Emissions by Design", Van Nostrand Reinhold, ISBN 0-442-00949-6. As for instruction, try Kimmel & Gerke's (www.emiguru.com) "EMI Made Simple" seminars. The material covered is complete, can be customized and can be presented in-house. Note: To all in the group. This message was, and should not be contrued as, an advertisement for any of the entities identified above. I am just relaying my own opinion. I hope this helps. Best regards, Ron Pickard [email protected] ----- Original Message ----- From: Keith Zell To: [email protected] Sent: Friday, September 15, 2000 10:25 AM Subject: EMC/EMI Training What training classes and/or books would you recommend for the best practical EMI/EMC training from a systems approach? I am particularly interested in grounding/shielding issues and fixes. Any help would be appreciated. B. Keith Zell Electrical Design Engineer PMI Food Equipment Group Troy, OH 45374 (937) 332-3067 (ph) (937) 332-3007 (fax) [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
