Brian: You can obtain the HV rectifiers from K2AW's Silicon Alley 175 Friends Lane Westbury NY. 11590
Tel/Fax 516-334-7024 e-mail : silicona...@aol.com He stocks rectifiers to 14KV PIV with Max Fwd Avg Current to 1000 ma. and Max Fwd Peak Surge Current of 250A Prices run about $14 each U.S. He carries lower voltages also at correspondingly less money. Ralph Cameron EMC Consultant and Suppression of Consumer Electronics (After Sale) ----- Original Message ----- From: "Brian Harlowe" <brian.harl...@vgscientific.com> To: <emc-p...@ieee.org> Sent: Tuesday, September 19, 2000 10:04 AM Subject: Supplies of HV Rectifiers > > > > > > I apologise that this question is outside the remit of this group but I am > > in a desperate situation and with the wealth of experience there is out > > there I hope some one can help me. > > > > We have manufactured in the past an X. Ray power supply that gets its EHT > > from a rectified three phase supply. Because all you whizzy electronic > > engineers are now using multipliers to make high voltage. Rectifiers that > > can handle 7-8kV at up to 20mA are getting like Rocking Horse manure to > > obtain in the UK. > > > > My question is can anyone point me in the direction of a supplier in the > > US > > or Far East of such beasts > > > > Many thanks in advance > > > > Brian Harlowe > > > > > > Brian Harlowe > > V.G. Scientific > > Tel +44 (0)1342 327211 > > Fax +44 (0)1342 315074 > > > > Received: from ruebert.ieee.org ([199.172.136.3]) by mail.monarch.com with > > SMTP > > (IMA Internet Exchange 3.14) id 00008C60; Tue, 19 Sep 2000 09:23:29 > > -0700 > > Received: by ruebert.ieee.org (8.9.3/8.9.3) id JAA17554 > > Received: from engine.ieee.org by ruebert.ieee.org (8.9.3/8.9.3) with > > ESMTP > > id > > JAA17540; Tue, 19 Sep 2000 09:25:25 -0400 (EDT) > > Received: from gemini2.ieee.org (gemini2.ieee.org [199.172.136.19]) > > by engine.ieee.org (Switch-2.0.6/Switch-2.0.1) with ESMTP id > > e8JDPLZ27172 > > for <emc-p...@ieee.org>; Tue, 19 Sep 2000 09:25:21 -0400 (EDT) > > Received: from kestrel.vgscientific.com ([193.130.56.103]) > > by gemini2.ieee.org (8.9.3/8.9.3) with ESMTP id JAA15261 > > for <emc-p...@ieee.org>; Tue, 19 Sep 2000 09:25:17 -0400 (EDT) > > Received: by KESTREL with Internet Mail Service (5.5.2650.21) > > id <TAPNHT2J>; Tue, 19 Sep 2000 14:29:01 +0100 > > Message-ID: <F9D85B6AF82BD4119AE800D0B769603B0A10A2@KESTREL> > > From: Brian Harlowe <brian.harl...@vgscientific.com> > > To: "'emc-p...@ieee.org'" <emc-p...@ieee.org> > > Subject: Help > > Date: Tue, 19 Sep 2000 14:28:59 +0100 > > MIME-Version: 1.0 > > X-Mailer: Internet Mail Service (5.5.2650.21) > > Content-Type: text/plain > > X-Resent-To: emc-pstc-ad...@ieee.org > > Precedence: bulk > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: jim_bac...@mail.monarch.com > Michael Garretson: pstc_ad...@garretson.org > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org