Daryl: The last information that I have (and somebody please advise if this is outdated), is that not one EU test lab that has applied for NRTL status has been approved by OSHA.
This seems to be the main sticking point for implementing the US-EU MRA. In other words, it exists, but is not yet implemented. So, to answer your question, if a product being sold in the USA requires NRTL approval (it doesn't have to be UL, it can be any of the other NRTL's), then having CE marking is not adequate. Sincerely, Robert Loop Engineering Supervisor Wyle Laboratories Product Safety ph - (256) 837-4411 x313 fax- (256) 721-0144 e-mail: [email protected] > ---------- > From: > [email protected][SMTP:[email protected]] > Reply To: [email protected] > Sent: Friday, September 29, 2000 9:43 AM > To: Alden; Daryl; '[email protected]'; '[email protected]'; > [email protected] > Subject: Re:US Approval > > > forwarding for [email protected] > > ____________________Reply Separator____________________ > Subject: US Approval > Author: "Alden; Daryl" <[email protected]> > Date: 9/29/00 4:10 AM > > > Can anybody advise me whether an MRA (mutual recognition agreement > )exsists > between the EU and the US? > If so does this mean that electrical and mechanical products tested to CE > standards do not need further approval (UL?) to be marketed in the states. > Thanks. > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
