Dear all, Surge test is mentioned in the EN 50082-1/1992 standard, but only in the informative annex, so there truly is no surge requirements in the standard. In the annex surge test is mentioned for both DC input and output ports and for AC input and output ports. I guess that the surge test was only placed in the annex because the basic standard was not ready.
Regards Niels Hougaard EMC and Safety BARCO AS Denmark > -----Original Message----- > From: Colgan, Chris [SMTP:[email protected]] > Sent: 30. juni 2000 17:13 > To: EMC-PSTC Newsgroup (E-mail) > Subject: RE: EN 50082-1 : 1992 > > > Nothing at all, surge is not mentioned. > > Regards > > Chris Colgan > EMC & Safety > TAG McLaren Audio Ltd > > mailto:[email protected] > > > > -----Original Message----- > > From: Wolak, Marvin [SMTP:[email protected]] > > Sent: 30 June 2000 15:09 > > To: EMC-PSTC Newsgroup (E-mail) > > Subject: EN 50082-1 : 1992 > > > > > > Here is an EMC related question. What did the EN 50082-1 standard dated > > 1992, (not the 1997 version), specify regarding surge requirements? > > > > Marvin Wolak > > > > Marconi Communications > > EMC Engineering, Product Integrity > > Ph: 724-742-7453 > > Fx: 724-742-7474 > > EMail: [email protected] > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Jim Bacher: [email protected] > > Michael Garretson: [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > > ===================================================== > Authorised on 06/30/00 at 16:19:20; code 37f48bf3D29FF8DB. > > > ********************************************************************** > The contents of this E-mail are confidential and for the exclusive use of > the intended recipient. > If you receive this E-mail in error, please delete it from your system > immediately and notify us either by E-mail, telephone or fax. You should > not copy, forward or otherwise disclose the content of the E-mail. > > TAG McLaren Audio Ltd, The Summit, 11 Latham Road > Huntingdon, Cambs, PE18 6ZU > Telephone : 01480 415600 (+44 1480 415600) > Facsimile : 01480 52159 (+44 1480 52159) > ********************************************************************** > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
