> 1) Is this logo replacing the old EMI/EMS logo (an oval shape logo
> surrounded by Korean wording and approval number)?
A>yes from 2000.5.22
> 2) When is this new logo effective? Any grandfather period?
A>from 2000.5.22
> 3) Do previous approved products need to change to this new logo?
A> Goverment said if you certified before 5.22,you can use any
logo.ie,change depend on you.
But if you certified after 5.22,you have to use only new logo.
ie,MIC mark.
> 4) What is the size requirement of this logo? And any specific placement of
> the korean wording?
A> Goverment said manufacturer resize MIC logo adequatly,so we
confuse.But have no choice.
Also including korean word.
> 5) If the product size is small or unable to affixed the whole label (as
> per the attached file), what is the minimum information that must placed
> onto the product?
A> Govement said manufacture make logo to visible by customer.so
minimum&maximum size isn't defined.
> 6) As the label states the applicant name, manufacturer and country, does
> this means different applicant name (i.e. different distributer) will have
> different approval number? Also if the same product is manufacturered in
> different countries, does it indicate different approval number too?
A>No!
> 7) Lastly, beside EMI/EMS requirement, does this label covers safety and
> PTT requirement too?
A>Sure.It cover EMI/EMS,Safety,PTT like as CE.
Thanks.
Tommy
----- Original Message -----
From: "kohscp" <[email protected]>
To: "EMC-PSTC" <[email protected]>
Sent: Tuesday, June 13, 2000 10:15 PM
Subject: Korea New EMI label
> Hi group,
> I just got a news from our Korean office that there is a new EMI label.
> This new label is to be affixed onto new products that are sent for EMI/EMS
> testing.
> See the attached file for sample format of the label.
>
> Could someone within the group advice me on the question for this new logo
> requirement.
>
> 1) Is this logo replacing the old EMI/EMS logo (an oval shape logo
> surrounded by Korean wording and approval number)?
> 2) When is this new logo effective? Any grandfather period?
> 3) Do previous approved products need to change to this new logo?
> 4) What is the size requirement of this logo? And any specific placement of
> the korean wording?
> 5) If the product size is small or unable to affixed the whole label (as
> per the attached file), what is the minimum information that must placed
> onto the product?
> 6) As the label states the applicant name, manufacturer and country, does
> this means different applicant name (i.e. different distributer) will have
> different approval number? Also if the same product is manufacturered in
> different countries, does it indicate different approval number too?
> 7) Lastly, beside EMI/EMS requirement, does this label covers safety and
> PTT requirement too?
>
> Thanks in Advance.
>
> Regards
> Koh
--------------------------------------------------------------------------------
>
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
