As the drawings show in EN61000-4-8, one way to achieve the required field
is to let the ground plane be the fourth side of a square loop. I have
found it more convenient to construct stand-alone loops that can be placed
over and under the EUT which is supported above an appropriate ground plane.
I would surmise that the requirement to ground one side of the loop is
based on safety of the person performing the test. A multi-turn loop
conceivably could require more than a few volts to achieve the required
current flow to produce the desired magnetic field intensity.
>Can someone explain to me why a ground plane is required in the test setup for
>EN 61000-4-8 (power frequency magnetic fields)?
>
>Thanks,
>Bob Heller
>3M Company
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
