John et al,
Refer to the following IEC web page for the details about this basic standard: http://www.iec.ch/cgi-bin/procgi.pl/www/iecwww.p?wwwlang=E&wwwprog=cat-det.p&wartnum=026133 It is not intended for use by manufacturers or certification bodies. I hope this helps. Best regards, Ron Pickard [email protected] "Boucher, John" <[email protected] To: "'[email protected]'" <[email protected]> ucent.com> cc: Sent by: Subject: IEC 62151 owner-emc-pstc@iee e.org 05/18/00 09:29 AM Please respond to "Boucher, John" All: I recently received an email notice of a new product safety standard: IEC 62151 "Safety of equipment electrically connected to a telecommunication network". --How does this standard relate to IEC 950 / 60950? --Will it be used in conjunction with 950, or stand-alone? --Is this similar to / reminiscent of EN 41003? Thanks in advance for the insights. John Boucher Lucent Technologies Inc. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
