Try a Helix cable. This is a high frequency, low loss cable suitable for taking measurements in the frequency range that you mentioned.
For cable specs contact Mr. John Royer in Phoenix, Arizona, at 410-987-9713. Regards, Bandele Jetstream Communications, Inc. [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, May 08, 2000 2:23 PM To: [email protected] Subject: Microwave Cables Friends, We have been performing EMC measurements below 1 GHz. Now we need to do measurements for 2.5 GHz systems to the 10th harmonic (25 GHz). What kind of coax (or other cable) have you found suitable for testing this frequency range on an OATS? Type and vendor would be appreciated. Also, a brief description, such as flexible, rigid, diameter, loss characteristics, typical connector system, etc would help. Any cable (or measurement) tips would be appreciated. Thanks, Don Umbdenstock Sensormatic ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
XMTR-TsT.RTF
Description: RTF file
