Dear all,
I would like to ask you the following:
§1.5.6 of IEC 60950 3rd ED - Capacitors in primary circuits states
that:
A capacitor connected between 2 lines conductors of the primary
circuit, or between one line conductor and the neutral conductor,
shall comply with IEC 60384-14, sub-class X1 or X2.
1) Does that mean that capacitors connected over the lines and after
the main fuses have to comply with the requirements ?
2) If yes, have capacitors connected in series with other components
(f.e. a resistance) to comply with the requirements too ?
I appreciate any answer.
Regards,
Huu Dung Dinh
DET NORSKE VERITAS, RN 413
Testing and Certification of Electrical Equipment
Division Nordic Countries
( +47 67 57 95 91
FAX +47 67 57 89 60
* Veritasveien 1, N-1322 Høvik, Norway
. huu.dung.d...@dnv.com
**********************************************************************
Neither the confidentiality nor the integrity of this message
can be guaranteed following transmission on the Internet.
This message has been swept by MAILsweeper at DNV for
the presence of computer viruses.
**********************************************************************
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: jim_bac...@mail.monarch.com
Michael Garretson: pstc_ad...@garretson.org
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
