There is an IEC Technical Report IEC61000-3-4 dealing with harmonics of products drawing over 16 Amps/phase. It does not have the stature of a standard, but is the preferred evaluation method. IEC TC77 is developing a standard from this report. John P. Wagner Lucent Technologies, Bell Labs 11900 N. Pecos St, Room 2F58 Denver CO 80234 email: [email protected] phone: 303 538-4241 fax: 303 538-5211
> ---------- > From: > [email protected][SMTP:[email protected]] > Reply To: [email protected] > Sent: Wednesday, May 10, 2000 8:29 AM > To: Mike Stone; [email protected] > Subject: Fwd:harmonic standards above 16 Amps > > > forwarded for Mike. > > ____________________Reply Separator____________________ > Subject: harmonic standards above 16 Amps > Author: "Mike Stone" <[email protected]> > Date: 5/9/00 7:43 AM > > Good Morning- > Are there AC harmonic standards for larger (Amps) products? At this time I > am testing a 50 Amp generator, and am having difficulty locating anything. > Your help is greatly appreciated. > > Sincerely, > > > Mike Stone > L.S. Compliance > W66 N220 Commerce Court > Cedarburg, WI 53012 > 262-375-4400 > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
