Robert, You may want to take a look at IEC 61010-2-031 considering you are dealing with a probe.
Regards, +=================================================================+ |Ronald R. Wellman |Voice : 408-345-8229 | |Agilent Technologies |FAX : 408-345-8630 | |5301 Stevens Creek Blvd., |E-Mail: [email protected]| |Mailstop 51L-SQ |WWW : http://www.agilent.com | |Santa Clara, California 95052 USA| | +=================================================================+ | "Common sense is the collection of prejudices acquired by age | | eighteen." - Albert Einstein | +=================================================================+ -----Original Message----- From: Loop, Robert [mailto:[email protected]] Sent: Tuesday, May 09, 2000 8:30 AM To: [email protected] Subject: EN61010-1 Question Group: A question on interpretation of Clause 6.3.1.1 and 6.3.1.2: If a product has an operator accessible cable that exits the equipment and operates normally at a level of 250 Vdc /200 uA, is it required to be marked with the hazardous voltage label? The cable is a probe where the user (a trained technician) could touch bare metal on the probe operating at the level noted. My thanks to those that respond. Sincerely, Robert Loop Engineering Supervisor Wyle Laboratories Product Safety ph - (256) 837-4411 x313 fax- (256) 721-0144 e-mail: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
