Peter, ITE equipment is regulated (EMC, Telecom and Wireless Approval) by Ministry of Communication and Information. However, Safety Regulation (Jun Mark which is Safety Mark in Korea) is controlled by Ministry of Industry.
Ryan Kim ----- Original Message ----- From: "Peter Merguerian" <[email protected]> To: "Ryan Kim" <[email protected]>; <[email protected]> Sent: Thursday, May 04, 2000 7:35 AM Subject: Re: Safety and EMC in Korea > > Ryan, > > Thanks. How about safety? Remember product is not telecom. Also, who > regulates ITE equipment? Is it customs? > > > At 12:01 03/05/2000 -0700, Ryan Kim wrote: > > > >Hi Peter, > > > >All of ITE product needs to have EMI/EMS Approval. You should send sample > to Korea and > >use local test lab in Korea for the test and report even though your > product already got > >CE mark. > > > >The following is the answer to your question, > > > >--------- You wrote ------------------- > >.> > > >> >Dear All, > >> > > >> >Can someone help to determine the steps for acceptance of safety and emc > >> >for a UL Listed and CE (Safety and EMC) ITE (no telecoms) product. > > > >===> All ITE products : subject to get KOREA EMC Approval. > > Printer, Monitor and AC/DC adapter : Needs to get Korea Safety > Mark which is JUN mark. > >> > > >> >For safety, is CB essential or is UL/CE Report enough? > > > >====> Actually Not, you have to send sample to Korea and retest according > to Korea deviation. > > However, if your product is not the printer, monitor and AC/DC > adapter, there is no requirment for the > > Safety Approval, that means only EMC approval is required. > >> > > >> >For emc, is CE (emissions and immunity) from a third party certification > >> >lab sufficient? > > > >====> You must use Korea Government accrediated lab for the testing and > reporting in Korea. > > KTL Ottawa is the only one which has Korea Government > Accrediation for the test and report. > > Other than KTL Ottawa, you have to send sample to Korea and test. > > Korea doesn't accept any third party certification at the monent. > >> > > >> >If you have any other question, please let me know. > > > >Regards, > > > >Ryan Kim / President of Haitong EMC > > > >> > > > > >------------------------------------------- > >This message is from the IEEE EMC Society Product Safety > >Technical Committee emc-pstc discussion list. > > > >To cancel your subscription, send mail to: > > [email protected] > >with the single line: > > unsubscribe emc-pstc > > > >For help, send mail to the list administrators: > > Jim Bacher: [email protected] > > Michael Garretson: [email protected] > > > >For policy questions, send mail to: > > Richard Nute: [email protected] > > > > > Peter Merguerian > Managing Director > Product Testing Division > I.T.L. (Product Testing) Ltd. > Hacharoshet 26, POB 211 > Or Yehuda 60251, Israel > > Tel: 972-3-5339022 Fax: 972-3-5339019 > e-mail: [email protected] > website: http://www.itl.co.il > > > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
