Derek: Try Steward at http://www.steward.com/emi/circuitboards/hicurrentchips.html for single chip devices up to 8 amps or
http://www.steward.com/emi/circuitboards/multhighcurrent.html for multiline ferrite blocks. You should find what you need there Jim Allan Senior Compliance Engineer Milgo Solutions Inc. E-mail [email protected] > I'm looking for a ferrite bead that has a steady current rating of at > least 6 > amps. It should also be able to withstand 5 seconds intermittent increases > to > 15 amps. Performance during the 15 pulse is not really necessary but > survival > is, it's a fault condition.... > > Any impedance greater than 50 ohns at 100 MHz would be fine. Potentially > even > less impedance may work enough..... > > Does anyone have any suggest parts? > > Thanks, > > Derek. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
