Hi All,
This month's technical tidbit article on www.dsmith.org is an
easier way to construct a 50 Ohm termination good to 1 GHz or
higher. Unlike my previous method, it is not necessary to try
to solder surfact mount resistors to the rim of a BNC barrel
adapter. The termination is useful by itself or as part of a
high frequency probe.
Next month's article will be "Paperclips and the Speed of Light."
It will be posted right after the first of the month.
Doug
--
-----------------------------------------------------------
___ _ Doug Smith
\ / ) P.O. Box 1457
========= Los Gatos, CA 95031-1457
_ / \ / \ _ TEL/FAX: 408-356-4186/358-3799
/ /\ \ ] / /\ \ Mobile: 408-858-4528
| q-----( ) | o | Email: [email protected]
\ _ / ] \ _ / Website: http://www.dsmith.org
-----------------------------------------------------------
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
