Hi Angus : At the end of last year, BSMI has made the following decision :
For Class B device, if the power is rated between 100V- 250V, the test voltage will be 110V/60Hz. You do not need to test 220V/60Hz. For Class A device, if the power is rated between 100V- 250V, the test voltage will be 110V/60Hz AND 220V/60Hz. ========================= Mike Kuo Compliance Certification Services 1366 Bordeaux Drive, Sunnyvale Ca 94089 Tel: (408)752-8166 x:105 Fax:(408)752-8168 [email protected] http://www.ccsemc.com -----Original Message----- From: Angus McGill (Cascade Engineering Svcs, Inc.) [mailto:[email protected]] Sent: Wednesday, March 01, 2000 2:38 PM To: EMC PSTC (E-mail) Subject: Conducted Emissions Testing for CNS13438 Class B Hi everyone: Does Taiwan's CNS13438 Class B approval require both 115V and 235V conducted emissions tests? Thanks, Angus McGill Regulatory Engineer Cascade Engineering Services, Inc. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
