Benoit,
Solar electronics (Hollywood, California, USA) makes an assortment of loop
antennas many of which would be applicable to the standards mentioned since
the standards allow the use of similar shaped antennas if the calibration
factors are known. Alternatively you can construct your own probe as specified
in the standard. You are allowed to use the theoretical calibration factors
given if you construct the probe as described in Annex A
Paul McCoy
Benoit Nadeau wrote:
> Bonjour de Montreal,
>
> I am presently looking to buy some test apparatuses to perform testing
> according to EN55103-1 and EN55103-2 and I having trouble to locate a
> manufacturer of Loop sensors and radiating coils as defined in the above
> mentioned standards.
>
> I found a source (Kikusui) using Internet but it is located in Japan but
> their local distributor in Canada told me that they do not want to
> distribute their sensors and coils outside Japan. Does anyone know a North
> America manufacturer or distributor for those devices?
>
> Thank you for your help,
>
> --------------------------------------------------------------------------
> Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng)
> Gerant du Groupe Conformite (Conformity Group Manager)
> Matrox <http://www.matrox.com/>
> --------------------------------------------------------------------------
>
> 1055, boul. St-Regis
> Dorval (Quebec) Canada
> H9P 2T4
>
> Tel : (514) 822-6000 (x2475)
> FAX : (514) 822-6275
> Internet : [email protected], <mailto:[email protected]>
>
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes). For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
