Why glue? Just roll out a piece of carpet. It won't move. If you are using the chamber for emissions precompliance and uniform field immunity, the impact of say a 10' x 10' piece of carpet should be insignificant.
Don > ---------- > From: Tony J. O'Hara[SMTP:[email protected]] > Reply To: Tony J. O'Hara > Sent: Wednesday, January 19, 2000 12:56 PM > To: Colgan, Chris > Cc: Tony J. O'Hara; 'Emc-Pstc' (E-mail) > Subject: Re: Carpet tiles on ferrite tiles? > > > I have seen carpet, vinyl and wood used to cover ferrite absorber. I would > recommend using a thin plywood/paneling such a 1/8'. As far as wood > containing moisture is concerned, as an amateur wood hobbyist from way > back, I know that the moisture content in wood will gradually adjust to > its > location. So, as long as your room doesn't have high humidity you should > be > OK. I would also expect the fibers in carpet to absorb the same or similar > amounts of moisture. I understand that the glue used can have a more > noticeable effect on the room than the wood itself. Use as little as > possible! Many tables, tripods etc used in chambers are all made of wood! > Any of the chamber manufacturers should be able to recommend an acceptable > material and glue! > Tony > Colorado > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
