IEC symbols at http://w3.hike.te.chiba-u.ac.jp/iec417/ver2.0/html/index.html
-----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, January 19, 2000 1:39 AM To: '[email protected]'; [email protected] Subject: Re:RE: IEC Symbol Richard, Hazard Comm. Sys., Inc, (www.hazcomsys.com), have catalog showing several pages of safety labels showing cut,mangled and severed fingers, (presumably with lots of blood), for every imaginable hazard, to ANSI Z535 and ISO 3864. Hope that helps, Tony Firth, Electrical Eng., Quester Technology Inc., Fremont,CA 94539. <-----Original Message----- <From: [email protected] [mailto:[email protected]] <Sent: Tuesday, January 18, 2000 1:55 PM <Subject: IEC Symbol <Is there an IEC 417 or other standard caution symbol for a sharp edge? I <can't seem to locate one, but I believe I have seen a symbol containing a <cut and bleeding finger. <Richard Woods --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
