Hi Stephen, Yes, table 1 outlines 4kV contact and 8kV air, Criterion B. Section 4.2.1 also goes on to clarify where (or where not) to apply either contact or air discharges and how many to apply.
Regards, Jeff Bailey Compliance Engineering SST - A Division of Woodhead Canada Phone: (519) 725 5136 ext. 363 Fax: (519) 725 1515 email: [email protected] <mailto:[email protected]> Web: www.mysst.com <http://www.mysst.com> -----Original Message----- From: Yow, Steve (IndSys, GEFanuc, NA) [mailto:[email protected]] Sent: Friday, November 30, 2001 10:30 AM To: 'EMC Post' Subject: EN50024 I know the answer is "go buy the darn standard", I thought I had it, but cant seem to find it. I have a simple question though and I know someone has the answer. In EN50024 what is the requirement for ESD. Is it 4kV contact and 8 kV air, Criterion B??? Regards, Stephen Yow GE Fanuc Automation P.O. Box 8106, Charlottesville, VA 22906 Compliance Team Leader, Technology PH: (804) 978-5915 Dial Comm: *277-5915 Fax: (804) 978-5102 Email: [email protected] Web Site: <http://www.gefanuc.com> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
