I have a few questions for the gurus in the group regarding cable calibration for emissions and immunity tests 1. what is the preferred step by step procedure for cable calibration using a sig. gen. and spectrum analyzer? 2. Is there any standard that outlines the procedure? 3.Does the procedure vary depending on the length of cable and thickness eg. coax vs cat. 3,4,5 4. How often should you calibrate the cables?
I would really appreciate comments on this subject. Thanks Bayode Olabisi ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.