For an IT product there is a restriction in the use of mains cords with a cross
sectional area of 0.75mm2 for units up to 6 amps when the cord is greater than
2m in length (EN60950: 2000 section 3.2.5)
Can anyone tell me is there is a requirement (in any standard) specifying a
maximum fuse rating that should be fitted to the plug of such a cord and what it
is?
Thanks in advance.
Kind regards,
Chris.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
