Since EN 61326 is a fairly recent vintage, and only _just_ displaced my use of EN50082, a couple of re-test questions:
1) Standard product already tested and 'declared' before EN61326 need not be re-tested to the terms of EN61326, correct? 2) Non-standard (modified) product, _based on_ declared product, tested prior to EN61326, but requiring new E&I tests; must re-test to EN61326? Many thanks to all, and Happy Thanksgiving stateside. Wm Flanigan Standards Engineer Ameritherm Inc 39 Main Street Scottsville, NY 14546 [email protected] 1.716.889.9000 1.716.889.4030 (fx) ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
