Maybe EN 301 489-3 (2001-11) is the valid EMC product standard. If you are going to fulfill the RTTE directive, don't forget the article 3.1.a: - electical safety (LVD) - the protection of the health and the safety of the user
I'm on thin ice here, but LVD might be covered by EN 60065, and health .... I don't know... ask a notified body. Best regards Amund Westin -----Opprinnelig melding----- Fra: [email protected] [mailto:[email protected]]På vegne av [email protected] Sendt: 16. november 2001 14:10 Til: [email protected] Emne: RE: 2.4GHz wireless headphone system If the product fits the definition of a Short Range Device, the following ETSI standards apply: EN 300 440-1 EN 300 440-2 EN 301 489-1 EN 301 489-? check which one of the series applies to your product You can download the standard from the ETSI web site for free. Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: KC CHAN [PDD] [mailto:[email protected]] Sent: Thursday, November 15, 2001 7:53 PM To: [email protected] Subject: 2.4GHz wireless headphone system Dear All My client is looking for the standards of a 2.4GHz wireless headphone system(not a SS product) for EU country. Would like to know what is the appropriate EMC and RF standards under EMC directive and R&TTE directive. Thank You KC Chan - PDD ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
