Compliance West USA makes high current continuity testers. I have a 200A model. Their website is:
http://www.compwest.com/ Patty Knudsen Ericsson Wireless Communications [email protected] -----Original Message----- From: Loop, Robert [mailto:[email protected]] Sent: Wednesday, November 14, 2001 6:12 AM To: [email protected] Subject: Grounding Continuity Testers for UL 60950 Good Morning Group, Does anyone have any information regarding high amperage continuity testers that might be purchased for testing compliance with Sub-Clause 2.6.3 of UL 60950? My concern is regarding high amperage equipment and the requirement to test at two times the circuit current. We are looking at a product rated at 100 amps. Where in the world can we get a tester that would go up to 200 amps with a 12 V output? Sincerely, Robert Loop Engineering Supervisor Wyle Laboratories Product Safety ph - (256) 837-4411 x313 fax- (256) 721-0144 e-mail: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
