Sorry for the abrupt response but time is short and there are I believe there are serious issues here.
If you would like to take some of these points off line please email me. A Class III LASER is dangerous! For UL/CSA you will need a FDA report. I have just completed just such a project. For CE Marking you might use that report (some may disagree because if it not of the EU). If you even need a CB Report you will need a IEC 825 (Number??) LASER REPORT An OPEN ??????? are there interlocks? - processes? - operating instruction? The unit is definitely NOT a COMPONENT Nor can it ever be considered as such. Even if it was a component you WOULD NOT be able to sent it round the world. There are many differing requirements - I'll leave it to people better qualified (like John Woodgate) to give you the details (please John). P.O. Box 310, Reedville, Virginia 22539 USA Phone: (804) 453-3141 Fax: (804) 453-9039 Web: www.test4safety.com free eLearning Solutions If the product only was a component I would just send it around the world but it can function as a product by just "adding a PC" to a RS 232 port. How should I tread this product when sending it to US/Canada ? Can I just add a label on the product with a text like this: For evaluation purpose only ? And what about EU, the manufacturer is located in EU ? Best regards, Kim Boll Jensen Bolls Raadgivning Consultant in type approvals ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.